Introduction of 100w laser cleaning machine

Introduction of 100w Laser cleaning machine

Introduction of 100w Laser cleaning machine. Nowadays laser technology is widely used.And more and more people pay attention on laser cleaning machine.

Firstly,Features of equipment

No damage to the base of the material because the no-touch surface cleaning performance
And precise cleaning technic for the specific area in a selected area
Also no need of chemistry or other added supplies
What’s more, it is easy to be operated.And it can be hand-held or auto-cleaned by installing a robotic arm
Besides,small cleaning time consumption and comes with a high quality finishing result
Finally, stable and impacted integrated design which results to no extra maintenance

Secondly,Operation Conditions

Type	MW-C100
Laser Type	LD-Fiber
Pulse Formation	Q-Switched (Quality factor)
Average Power, Max	100.00 (W)
Average Power (W)	0-100 Output Range(adjustable)
Pulse-Frequency,Range	20-200 (KHz)
Scanning Width (mm)	10~80
Expected Focal Distance(mm)	160mm
Fiber Length (m)	5m / 10m（customized）
Cooling Type	Air cooling
Input Power	220V, 50/60H
Power Consumption (W)	800W（including Chiller）
Dimensions(mm³)	850mm×700mm×880mm
Weight	140Kg
Working environment temperature	0℃～40℃
Working environment humidity	≤80%
Move Method	Pulley
Scanning Head Weight	2KG
Focal Spot Diameter(mm)	0.08mm
Cleaning Efficiency	5m³/h

Thirdly,the scope of application

A Metal surface derusting

B And surface paint removal paint treatment

C And, surface oil, stains and dirt cleaning

D And ,surface coating and coating removal

E And ,welding surface or spray surface pretreatment

F Also stone surface dust and attachment removal

G Finally, rubber mold residue cleaning

Fourthly, Attentions

1、Don’t taking the cleaning head directly toward people. And notice high reflectivity materials (copper,aluminum…).

2、In addtion,taking on labor protection appliance and eyewear when using.

3、What’s more,the alarm light will be on. If laser machine hasn’t been turned off properly and service life will be influenced. So we suggest user to check every button weather they are reset or not before power supply.

It’s forbidden to make cleaning head at a right angle to materials.
And hange water in chiller every 3-6 months with deionized water.
Also bending radius of corrugated pipe must be no smaller than 250mm(≥250mm).
Finally, positions as pictures show below should be protected properly and avoid being bent excessively.

Fifthly,warranty

MAXWAVE LASER promises to maintain products which are produced and sent according to a formal contract.And guarantees every repaired machine will function good if used properly for one year.

MAXWAVE LASER has the rights to repair or replace a product in warranty period if it has a material or technical problem. And we will charge for the maintenance under normal circumstances. It will be free if the machine has special problems.

Sixthly,Laser cleaning machine advantages:

if 1, the laser cleaning is dry cleaning and no exhaust emissions. Also it does not cause environmental pollution and cleaning residues through the vacuum cleaner recycling.

So 2, In addtion,it can effectively clean the other method is difficult to remove the clean surface adsorption of submicron particles.
if 3, Finally,the laser can be transmitted by optical fiber. And robots and robots to match. They are easy to achieve long-distance operation. And o clean the traditional method is not easy to reach the site, which in some dangerous places to use to ensure the safety of personnel;

Applicatoin:

1.Oxide Removal
2.Mold Cleaning
3.Surface Preparation
4.Coatings Removal
5.Weld pre-treatment
6.Gluing pre-treatment
7.Removal of Oil and Grease
8.Paint Removal
9.Surface Cleaning
10.Stain Removal
11.Surface Roughening
12.Tool Cleaning
13.Historic Restoration
14.Selective Paint Removal
15.Precise Cleaning

News

Introduction of 100w laser cleaning machine